TBOR-shaped electro-optic modulator with dual output based on double-layer graphene

We proposed an electro-optic modulator with two-bus one-ring (TBOR) structure to improve the extinction ratio and reduce insert loss. It has a dual output compared with one-bus one-ring structure. In addition, double-layer graphene makes it possible for the modulation in the visible to mid-infrared wavelength range. It shows that this new electro-optic modulator can present two switching states well with low insertion loss, high absorption and high extinction ratio. At $\lambda =1550\text{ nm}$, when the switching states are based on the chemical potential, ${\mu }_{\mathrm{c}}=0.38\text{ eV}$ and ${\mu }_{\mathrm{c}}=0.4\text{ eV}$, the insertion losses of both output ports are less than 2 dB, the absorption of the output port coupled via a micro-ring reaches 45 dB and the extinction ratio reaches 14 dB. When the refractive index of the dielectric material is 4.2, the applied voltage will be less than 1.2 V, thus can be used in low-voltage CMOS technology.     

油-气-水三相流超声传感器持气率测量*

为探索油-气-水三相流持气率测量难题,该文开展了脉冲透射式超声传感器持气率测量动态实验研究。首先,利用超声传感器与光纤传感器组合,测取了油-气-水三相流中段塞流、混状流、泡状流的响应信号;其次,提取了超声脉冲信号的最大值序列来反映不同流型时超声传感器响应特性,同时,借助双头光纤传感器与相关测速法,计算得到了流体中气泡弦长序列;最后,结合流型与泡径信息,利用超声传感器测量了不同流型下持气率,并分析了不同流型持气率预测的误差来源,为其他油-气-水三相流持气率测量传感器设计提供了借鉴。     

La单掺4H-SiC电子结构和光学性质的第一性原理研究

采用基于密度泛函理论的第一性原理计算方法，对未掺杂及La掺杂4H-SiC的电子结构和光学性质进行理论计算。计算结果表明，未掺杂4C-SiC其禁带宽度为2.257 eV。La掺杂后带隙宽度下降为1.1143eV，导带最低点为G点，价带最高点为F点，是P型间接半导体。掺杂La原子在价带的低能区间贡献比较大，而对价带的高能区和导带的贡献比较小。未掺杂4H-SiC在光子能量为6.25 eV时，出现一个介电峰，这是由于价带电子向导带电子跃迁产生。而La掺杂后，出现3个介电峰，分别对应的光子能量为0.47eV、2.67eV、6.21eV，前两个介电峰是由于价带电子向杂质能级跃迁产生，第三个介电峰是由于价带电子向导带电子跃迁产生。La掺杂后4H-SiC变成负介电半导体材料。未掺杂4h-SiC的静态介电常数为2.01，La掺杂的静态常数为12.01。     

Study of electron-vibrational interaction and concentration quenching effect of Cu+ ions in lithium based sulphate phosphors

The objective of this work is to study electron-vibrational interaction (EVI) and concentration quenching and their manifestation in experimental photoluminescence spectra of Cu⁺ ion in various lithium based phosphors namely, Li₂SO₄, LiNaSO₄ and LiKSO₄. The main parameters of EVI, such as the Stokes shift, Huang-Rhys factor and zero-phonon line positions, were estimated. The studied systems shows strong electron lattice coupling. The validity of results was established by modeling the shape of the emission spectra, which was found to be in good agreement with experimental photoluminescence spectra. The concentration quenching study is also carried out for these compounds. The studied systems correspond to the nearest neighbor energy transfer mechanism.     

Defects related emission and nanosecond optical power limiting in CuS quantum dots

We report optical and nonlinear optical properties of CuS quantum dots and nanoparticles prepared through a nontoxic, green, one-pot synthesis method. The presence of surface states and defects in the quantum dots are evident from the luminescent behavior and enhanced nonlinear optical properties measured using the open aperture Z-scan, employing 5 ns laser pulses at 532 nm. The quantum dots exhibit large effective third order nonlinear optical coefficients with a relatively lower optical limiting threshold of 2.3 J cm⁻², and the optical nonlinearity arises largely from absorption saturation and excited state absorption. Results suggest that these materials are potential candidates for designing efficient optical limiters with applications in laser safety devices.     

椭圆偏振法测定在线Low-E玻璃的可见-近红外光学常数与膜厚

从在线Low-E玻璃光学机理出发,用椭圆偏振光谱仪对在线Low-E玻璃功能层和过渡层的可见-近红外波段的光学常数进行研究.测量了样品在三个不同入射角的椭偏参数,分别用Lorentz双振子模型和Cauchy模型来描述Low-E玻璃功能层和过渡层的光学色散特性.通过拟合椭偏参数获得在线Low-E玻璃的光学常数及每层膜厚度,并用扫描电镜对样品的膜厚进行表征.结果表明,Lorentz双振子模型和Cauchy模型能很好地解释在线Low-E玻璃的光学特性;同时,椭圆偏振法也为多层膜系统提供了一种测定光学常数和膜厚的可靠方法.     

Curvature investigation in tapered fibers and its application to sensing and mode conversion

Non-adiabatic tapered fibers are basic photonic components used in a wide range of applications. Here we investigate a way to increase their utility through the controllable bending of one of their tapered sections. The experiments carried out explain, for the first time, the mechanics of this approach showing how these tapers can be used to build more sensitive sensors. Their use as highly efficient mode converters is also discussed.     

Optical analysis of polymer powder materials for Selective Laser Sintering

This study increases the basic understanding of optical material properties of polymer powders used in selective laser sintering (SLS). Therefore, different polymer powder materials were analyzed regarding their optical material properties with an integration spheres measurement setup. By the measurements a direct connection between the absorption behavior of the solid material and the overall optical material characteristics of the same material in powdery form could be shown. The results were used to develop an advanced explanation model for the optical material properties of powders. At present, existing explanation models only consider the occurring of multiple reflections in the gaps between the particles to explain the overall optical material properties of powder materials. Thus, by also considering the absorption behavior of the single particles, the basic understanding of the beam-matter interaction and their effect on the optical material properties of powder materials can be expanded.